Emission characteristics for co-combustion of leather wastes, sewage sludge, and coal in a laboratory-scale entrained flow tube furnace.

Abstract:

A novel system combining sludge drying and co-combustion with coal was applied in disposing sludge and its atmospheric emission characteristics were tested. The system was composed of a hollow blade paddle dryer, a thermal drying exhaust gas control system, a 75 tons/hr circulating fluidized bed and a flue gas cleaning system. The emissions of NH3, SO2, CH4 and some other pollutants released from thermal drying, and pollutants such as NOx, SO2 etc. discharged by the incinerator, were all tested. Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in the flue gas from the incinerator were investigated as well. The results indicated that the concentrations of NOx and SO2 in the flue gas from the incinerator were 145 and 16 mg/m3, respectively. and the I-TEQ concentration of 2,3,7,8-substitued PCDD/Fs was 0.023 ng I-TEQ/Nm3. All these values were greatly lower than the emission standards of China. In addition, there was no obvious odor in the air around the sludge dryer. The results demonstrated that this drying and co-combustion system is efficient in controlling pollutants and is a feasible way for large-scale treatment of industrial sludge and sewage sludge.

Read the whole study:

Emission characteristics for co-combustion of leather wastes, sewage sludge, and coal in a laboratory-scale entrained flow tube furnace.